power entry modules without line filter 6 36 www.schurter.com/pg0 5 appliance inlet iec appliance inlet c20 with circuit breaker ta35 1-pole c20 70 c description - panel mount: snap-in version from front side - 2 functions: appliance inlet, protection class i, circuit breaker type ta35, 1-pole - quick connect terminals 6.3 x 0.8 mm - alternative: version for 10 a (15 a) 613 5 - substitute for type 1624- k approvals - vde license number: 40025196 - ul license number: e96454 characteristics - unwired - switch non-illuminated or illuminated thermal overload protection - qualified for use in equipment according iec/en 60950 other versions on request - pre-wired version - quick-connect terminals 4.8 x 0.8 mm - protection class ii, 70c references general product informatio n weblinks approval s , roh s , china-roh s , e-stor e , schurter-stock-chec k , distributor-stock-chec k technical data ratings iec 16 a / 250 vac; 50 hz ratings ul/csa 20 a / 250 vac; 60 hz dielectric strength > 2.5 kvac between l-n > 3 kvac between l/n-pe (1 min/50 hz) allowable operation temp. -25 c to 60 c degree of protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class i acc. to iec 61140 terminal quick connect terminals 6.3 x 0.8 mm panel thickness s snap-in: 1.5/ 2/ 2.5 mm material: housing thermoplastic, black, ul 94v-0 appliance-inlet/-outlet c20 acc. to iec/en 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 16 a, protection class i circuit breaker acc. iec/en 60934, ul 1077, csa 22.2 no. 235 1-pole rocker switch, illuminated or non- illuminated. conditional short circuit inc: 2000 a
power entry modules without line filter 6 36 www.schurter.com/pg0 5 appliance inlet dimensions length 53.6 mm r 3 43.2 +0.2 0 50.8 +0.2 0 max. r 2 s 53.6 10.6 7 30.5 3 0.05 19 1.5 43 x 50.6 46 diagrams non-illuminated l n pe pe' l' p 1 4 n' 1) 2) ta 35 1) line 2) load illuminated (connection n' to l) l n pe pe' l' p 1 4 n' 1) 2) l ta 35 1) line 2) load
3 power entry modules without line filter 6 36 www.schurter.com/pg0 5 appliance inlet rated curr ent i n (a) other rated curr ents on r equest f 120 c0 no other featur es f embossed h printed white k printed black l printed white m printed black surface illustration colour of print rocker legend l 0 on off on off l l 0 0 other legends on r equest colours switch fr ont rocker non-illuminated illuminated w black white ? b black black ? 3 black ? re d transpar ent 4 black ? gr een transpar ent 6 black ? orange transpar ent other colours on r equest cft w t a35- order code switch without cft illumination switch illuminated 240 v c 2f 120 v c 4f other versions on r equest t able 1 selection for type t a35 or der example position of the r ocker legend e.g. f line p1 load l 4 number of switched poles 1-pole number of pr otected poles 1 i n code 8,0 080 10,0 100 12,0 120 15,0 150 20,0 200 i n c od e 1,0 j10 2,0 j20 4,0 040 5,0 050 6,0 060
power entry modules without line filter 6 36 www.schurter.com/pg0 5 appliance inlet t echnical data (continued) cir cuit br eaker t ripping characteristics i n < 3 a t ripping characteristics i n > 3... < 20 a ef fect of ambient temperatur e the unit is calibrated for an ambient temperatur e of +23 c. t o determine the rated curr ent for lower or higher ambient temperatur e, use a corr ection factor fr om the table below . * ambient correction f actor temperature [c] ?25 0.79 ?20 0.81 0 0.90 +23 1.00 +40 1.03 +50 1.04 +60 1.06 * t emperatur e must be measur ed at the r ear of the br eaker next to the terminals after equipment operating tempera- tur e has been r eached. example: rated curr ent at +23 c 10 a ambient temperatur e +60 c corr ection factor 1.06 chosen rated curr ent at +60 c ambient temperatur e: 10 a x 1.06 = 10.6 a ty pe or der code t a35 6136 c f t w f 1 2 0 c 0 . 0 2 1 0 see table 1 or der code (or der example) please note that schurter will establish an inter nal part number for logistics use in addition to the or der code. the format of this inter nal part number is, for example: 6136.xxxx.xxxx wiring 1 wir ed 0 unwir ed t erminals 1 quick connect 6.3 x 0.8 mm 0 pr otection class 1 mounting 2 snap-in s = 1.5 mm 3 snap-in s = 2.0 mm 4 snap-in s = 2.5 mm t ype p ta 3 5 rated curr ent <3 a (tc-1, tc-2) ambient temp. +23 c multiple of rated curr ent [ x i n ] 1,05 10 8 5 4 3 2 1,35 tr ipping time 10'000 60 2`000 1`000 500 200 100 50 20 10 [ sec ] [ min ] 10 5 1 30 20 5 2 1 0,5 0,3 0,2 0,1 1,05 10 8 5 4 3 2 1,35 10'000 60 2`000 1`000 500 200 100 50 20 10 [ sec [ min ] 10 5 1 30 20 5 2 1 0,5 0,3 0,2 0,1 ] > 3 ? 20a (tc-1, tc-2) t ype ta 35 rated curr ent ambient temp. +23 c multiple of rated curr ent [ x i n ] tr ipping time
5 power entry modules without line filter 6 36 www.schurter.com/pg0 5 appliance inlet packaging unit 15 pcs mating outlets/connectors category / description connecto r iec connector c19, cord connector (rewireable), straight 010 4 iec connector c19, cord connector (rewireable), angled 165 1 iec connector c19, cord connector (rewireable), straight 165 2 iec connector c19, cord connector (rewireable), angled 479 0 iec connector c19, cord connector (rewireable), straight 479 5 power cor d power cord with iec appliance connector c19, straight 165 4 power supply or interconnection cor d 6009.519 5 the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
